Introduction of Engineered Hardwood Flooring Engineered flooring consist of two or more layers of wood using a cross-directional way to adhered together to form a plank. Typically, engineered wood flooring uses a thin layer of genuine premium hardwood bonded to a core constructed.
Distressed Engineered Hardwood Flooring
7 coat of Treffert
Country of Origin
Multi-layer eucalyptus plywood, birch plywood with WBP glue
Structure of Wood Flooring
Installation Guide of Engineered Hardwood Flooring Whichever method you choose, you'll need to prepare the subfloor by cleaning, leveling, and checking.
Glue-down Installations: This is an especially popular method for distressed engineered hardwood flooring installations on sub-floors. 1. Spread sufficient amounts of adhesive with trowel in an area.Keep trowel with a 45-degree angle and spread the glue and make sure the trowel touch the concrete. 2. Use the longest, straight boards available for the first row, still need to leave a expansion gap. 3. Fit the second row's groove on the first row's tongue and using a rubber mallet . 4. Continue to spread glue in small sections which you can work on two or three rows at one time.
Floating Installation: Before installing a floating engineered hardwood floor, follow the same preparation steps mentioned above. 1. Select the first board and arrange the groove side against the wall. Install a wedge on the end of the board between the hardwood flooring and the wall, allowing 15mm expansion gap. 2. Starting additional rows, work from left to right. 3. Measure from board (not tongue) to wall and subtract the expansion gap to know the correct cut for the last row of boards.
Hot Tags: distressed engineered hardwood flooring, China, suppliers, manufacturers, factory, wholesale, customized, for sale